Referências do Artigo "O BIM como suporte à construtibilidade e sua relação com a construção enxuta"

[Materiais de estudos – Imagem: Pexels/Pixabay]

@article{RN1641,
   author = {Ahuja, R. and Sawhney, A. and Arif, M.},
   title = {Driving lean and green project outcomes using BIM: A qualitative comparative analysis},
   journal = {International Journal of Sustainable Built Environment},
   volume = {6},
   number = {1},
   pages = {69-80},
   DOI = {10.1016/j.ijsbe.2016.10.006},
   year = {2017},
   type = {Journal Article}
}

@inproceedings{RN1643,
   author = {Ahuja, R. and Sawhney, A. and Arif, M.},
   title = {Prioritizing BIM Capabilities of an Organization: An Interpretive Structural Modeling Analysis C3 - Procedia Engineering},
   volume = {196},
   pages = {2-10},
   DOI = {10.1016/j.proeng.2017.07.166},
   type = {Conference Proceedings}
}

@article{RN1402,
   author = {Ajayi, S. O. and Oyedele, L. O. and Akinade, O. O. and Bilal, M. and Alaka, H. A. and Owolabi, H. A. and Kadiri, K. O.},
   title = {Attributes of design for construction waste minimization: A case study of waste-to-energy project},
   journal = {Renewable & Sustainable Energy Reviews},
   volume = {73},
   pages = {1333-1341},
   ISSN = {1364-0321},
   DOI = {10.1016/j.rser.2017.01.084},
   year = {2017},
   type = {Journal Article}
}

@book{RN1395,
   author = {Alaghbandrad, A. and Hammad, A.},
   title = {Developing Information Model for Multi-Purpose Utility Tunnel Lifecycle Management},
   publisher = {Amer Soc Civil Engineers},
   address = {New York},
   series = {Construction Research Congress 2018: Infrastructure and Facility Management},
   pages = {393-402},
   ISBN = {978-0-7844-8129-5},
   year = {2018},
   type = {Book}
}

@book{RN1394,
   author = {Amrollahibuki, R. and Hammad, A.},
   title = {Modeling construction equipment in 4D simulation},
   publisher = {Crc Press-Taylor & Francis Group},
   address = {Boca Raton},
   series = {Ework and Ebusiness in Architecture, Engineering and Construction},
   pages = {243-250},
   ISBN = {978-0-429-50621-5; 978-1-138-58413-6},
   url = {<Go to ISI>://WOS:000460971200030},
   year = {2018},
   type = {Book}
}

@article{RN1604,
   author = {Aredah, A. S. and Baraka, M. A. and Elkhafif, M.},
   title = {Project Scheduling Techniques Within a Building Information Modeling (BIM) Environment: A Survey Study},
   journal = {IEEE Engineering Management Review},
   volume = {47},
   number = {2},
   pages = {133-143},
   DOI = {10.1109/EMR.2019.2916365},
   year = {2019},
   type = {Journal Article}
}

@article{RN1419,
   author = {Bockstael, D. and Issa, M. H.},
   title = {A METHODOLOGY FOR CONTRACTOR CLASH DETECTION USING BUILDING INFORMATION MODELLING ON COMMERCIAL CONSTRUCTION PROJECTS},
   journal = {Journal of Information Technology in Construction},
   volume = {21},
   pages = {233-249},
   ISSN = {1874-4753},
   year = {2016},
   type = {Journal Article}
}

@inproceedings{RN1692,
   author = {Castro-Lacouture, D. and Quan, S. J. and Yang, P. P. J.},
   title = {GIS-BIM framework for integrating urban systems, waste stream and algal cultivation in residential construction C3 - 31st International Symposium on Automation and Robotics in Construction and Mining, ISARC 2014 - Proceedings},
   pages = {576-583},
   type = {Conference Proceedings}
}

@article{RN1726,
   author = {Chan, N. and Li, H.},
   title = {Optimizing construction planning and scheduling through combined virtual prototyping technology and building information models C3 - VTT Symposium (Valtion Teknillinen Tutkimuskeskus)},
   number = {259},
   pages = {320-332},
   year = {2009},
   type = {Journal Article}
}

@book{RN1440,
   author = {Chen, D. and Ma, J. M.},
   title = {BIM-based Control on the Safety of Curtain Walls},
   publisher = {China Architecture & Building Press},
   address = {Beijing},
   series = {Proceedings of 2012 International Conference on Construction & Real Estate Management, Vols 1 and 2},
   pages = {374-376},
   ISBN = {978-7-112-14631-4},
   url = {<Go to ISI>://WOS:000324566700077},
   year = {2012},
   type = {Book}
}

@article{RN1383,
   author = {Chidambaram, S.},
   title = {Application of building information modelling for reinforcement waste minimisation},
   journal = {Proceedings of the Institution of Civil Engineers-Waste and Resource Management},
   volume = {172},
   number = {1},
   pages = {3-13},
   ISSN = {1747-6526},
   DOI = {10.1680/jwarm.17.00027},
   year = {2019},
   type = {Journal Article}
}

@article{RN1428,
   author = {Choi, J. and Kim, H. and Kim, I.},
   title = {Open BIM-based quantity take-off system for schematic estimation of building frame in early design stage},
   journal = {Journal of Computational Design and Engineering},
   volume = {2},
   number = {1},
   pages = {16-25},
   ISSN = {2288-4300},
   DOI = {10.1016/j.jcde.2014.11.002},
   year = {2015},
   type = {Journal Article}
}

@inproceedings{RN1648,
   author = {Chou, P. and Shi, Y. and Burdick, M. and Nicholson, P.},
   title = {Systematic cross-passage design and construction planning for transit tunnels C3 - Proceedings - Rapid Excavation and Tunneling Conference},
   pages = {764-774},
   type = {Conference Proceedings}
}

@inproceedings{RN1703,
   author = {Chung, D. K. and Park, S. J. and Shim, C. S. and Kim, K. B.},
   title = {Parametric modelling for modular prefabricated bridges C3 - Proceedings of the 13th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC 2013},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84905274626&partnerID=40&md5=5f9eea76d56042b613ba7754cc7e2e59},
   type = {Conference Proceedings}
}

@inproceedings{RN1666,
   author = {Collins, J.},
   title = {Incorporating BIM into architectural precast concrete fabrication C3 - ISARC 2016 - 33rd International Symposium on Automation and Robotics in Construction},
   pages = {392-402},
   type = {Conference Proceedings}
}

@article{RN1445,
   author = {Dossick, C. S. and Neff, G.},
   title = {Organizational Divisions in BIM-Enabled Commercial Construction},
   journal = {Journal of Construction Engineering and Management-Asce},
   volume = {136},
   number = {4},
   pages = {459-467},
   ISSN = {0733-9364},
   DOI = {10.1061/(asce)co.1943-7862.0000109},
   url = {<Go to ISI>://WOS:000275657700008},
   year = {2010},
   type = {Journal Article}
}

@inproceedings{RN1798,
   author = {Duguid, B. and Jenkins, P. and Osborne, T.},
   title = {A case study in design collaboration: Design development for the bridges of the Ordsall Chord C3 - IABSE Conference, Bath 2017: Creativity and Collaboration - Report},
   pages = {194-201},
   type = {Conference Proceedings}
}

@inproceedings{RN1629,
   author = {Duncheva, T. and BuHamdan, S. and Hairstans, R. and Al-Hussein, M.},
   title = {BIM-enabled health & safety analysis of cross laminated timber onsite assembly process C3 - 17th International Conference on Modeling and Applied Simulation, MAS 2018},
   pages = {136-145},
   type = {Conference Proceedings}
}

@article{RN1392,
   author = {Eleftheriadis, S. and Duffour, P. and Greening, P. and James, J. and Stephenson, B. and Mumovic, D.},
   title = {Investigating relationships between cost and CO2 emissions in reinforced concrete structures using a BIM-based design optimisation approach},
   journal = {Energy and Buildings},
   volume = {166},
   pages = {330-346},
   ISSN = {0378-7788},
   DOI = {10.1016/j.enbuild.2018.01.059},
   year = {2018},
   type = {Journal Article}
}

@article{RN1389,
   author = {Eleftheriadis, S. and Duffour, P. and Stephenson, B. and Mumovic, D.},
   title = {Automated specification of steel reinforcement to support the optimisation of RC floors},
   journal = {Automation in Construction},
   volume = {96},
   pages = {366-377},
   ISSN = {0926-5805},
   DOI = {10.1016/j.autcon.2018.10.005},
   year = {2018},
   type = {Journal Article}
}

@article{RN1410,
   author = {Eleftheriadis, S. and Mumovic, D. and Greening, P.},
   title = {Life cycle energy efficiency in building structures: A review of current developments and future outlooks based on BIM capabilities},
   journal = {Renewable & Sustainable Energy Reviews},
   volume = {67},
   pages = {811-825},
   ISSN = {1364-0321},
   DOI = {10.1016/j.rser.2016.09.028},
   url = {<Go to ISI>://WOS:000389088900059},
   year = {2017},
   type = {Journal Article}
}

@article{RN1696,
   author = {Eley, D. and Aldwinckle, G.},
   title = {Digital design collaboration and complex fabrication},
   journal = {Structural Engineer},
   volume = {91},
   number = {11},
   pages = {66-70},
   year = {2013},
   type = {Journal Article}
}

@article{RN1370,
   author = {Fadoul, A. and Tizani, W. and Koch, C.},
   title = {A BIM-based model for constructability assessment of conceptual design},
   journal = {Advances in Computational Design},
   volume = {3},
   number = {4},
   pages = {367-384},
   ISSN = {2383-8477},
   DOI = {10.12989/acd.2018.3.4.367},
   url = {<Go to ISI>://WOS:000448366300003},
   year = {2018},
   type = {Journal Article}
}

@article{RN1670,
   author = {Farnsworth, C. B. and Beveridge, S. and Miller, K. R. and Christofferson, J. P.},
   title = {Application, Advantages, and Methods Associated with Using BIM in Commercial Construction},
   journal = {International Journal of Construction Education and Research},
   volume = {11},
   number = {3},
   pages = {218-236},
   DOI = {10.1080/15578771.2013.865683},
   year = {2015},
   type = {Journal Article}
}

@inproceedings{RN1661,
   author = {Filho, J. B. P. D. and Angelim, B. M. and Guedes, J. P. and Silveira, S. S. and De Paula Barros Neto, J.},
   title = {Constructability analysis of architecture-structure interface based on BIM C3 - IGLC 2016 - 24th Annual Conference of the International Group for Lean Construction},
   pages = {73-82},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84995939783&partnerID=40&md5=40ee505f663923117c05d283574c7d0d},
   type = {Conference Proceedings}
}

@inproceedings{RN1665,
   author = {Funtík, T. and Gašparík, J.},
   title = {Site plan development: Tower crane placement based on data obtained from IFC file C3 - ISARC 2016 - 33rd International Symposium on Automation and Robotics in Construction},
   pages = {36-41},
   type = {Conference Proceedings}
}

@article{RN1382,
   author = {Gbadamosi, A. Q. and Mahamadu, A. M. and Oyedele, L. O. and Akinade, O. O. and Manu, P. and Mahdjoubi, L. and Aigbavboa, C.},
   title = {Offsite construction: Developing a BIM-Based optimizer for assembly},
   journal = {Journal of Cleaner Production},
   volume = {215},
   pages = {1180-1190},
   ISSN = {0959-6526},
   DOI = {10.1016/j.jclepro.2019.01.113},
   url = {<Go to ISI>://WOS:000459358300101},
   year = {2019},
   type = {Journal Article}
}

@article{RN1698,
   author = {Gerth, R. and Boqvist, A. and Bjelkemyr, M. and Lindberg, B.},
   title = {Design for construction: Utilizing production experiences in development},
   journal = {Construction Management and Economics},
   volume = {31},
   number = {2},
   pages = {135-150},
   DOI = {10.1080/01446193.2012.756142},
   year = {2013},
   type = {Journal Article}
}

@article{RN1673,
   author = {Getz, J. and Saenz, J.},
   title = {Unified workflow: Better BIM = better designs},
   journal = {Engineered Systems},
   volume = {32},
   number = {8},
   pages = {36-39},
   year = {2015},
   type = {Journal Article}
}

@article{RN1393,
   author = {Gholizadeh, P. and Esmaeili, B. and Goodrum, P.},
   title = {Diffusion of Building Information Modeling Functions in the Construction Industry},
   journal = {Journal of Management in Engineering},
   volume = {34},
   number = {2},
   pages = {14},
   ISSN = {0742-597X},
   DOI = {10.1061/(asce)me.1943-5479.0000589},
   url = {<Go to ISI>://WOS:000422884200017},
   year = {2018},
   type = {Journal Article}
}

@article{RN1631,
   author = {Govender, K. and Nyagwachi, J. and Smallwood, J. J. and Allen, C. J.},
   title = {The awareness of integrated project delivery and building information modelling - facilitating construction projects},
   journal = {International Journal of Sustainable Development and Planning},
   volume = {13},
   number = {1},
   pages = {121-129},
   DOI = {10.2495/SDP-V13-N1-121-129},
   year = {2018},
   type = {Journal Article}
}

@article{RN1384,
   author = {Gunhan, S.},
   title = {Analyzing Sustainable Building Construction Project Delivery Practices: Builders' Perspective},
   journal = {Practice Periodical on Structural Design and Construction},
   volume = {24},
   number = {1},
   pages = {10},
   ISSN = {1084-0680},
   DOI = {10.1061/(asce)sc.1943-5576.0000397},
   url = {<Go to ISI>://WOS:000453221500005},
   year = {2019},
   type = {Journal Article}
}

@inproceedings{RN1727,
   author = {Hijazi, W. and Alkass, S. and Zayed, T.},
   title = {Constructability assessment framework using BIM technology C3 - Proceedings, Annual Conference - Canadian Society for Civil Engineering},
   volume = {3},
   pages = {1334-1343},
   type = {Conference Proceedings}
}

@article{RN1895,
   author = {Hijazi, W. and P, S. and Tarek and Zayed, Tarek},
   title = {Constructability assessment using BIM/4D CAD simulation model},
   year = {2009},
   type = {Journal Article}
}

@article{RN1435,
   author = {Ho, S. P. and Tserng, H. P. and Jan, S. H.},
   title = {Enhancing Knowledge Sharing Management Using BIM Technology in Construction},
   journal = {Scientific World Journal},
   pages = {10},
   ISSN = {1537-744X},
   DOI = {10.1155/2013/170498},
   year = {2013},
   type = {Journal Article}
}

@article{RN1685,
   author = {Jiang, L. and Leicht, R. M.},
   title = {Automated rule-based constructability checking: Case study of formwork},
   journal = {Journal of Management in Engineering},
   volume = {31},
   number = {1},
   DOI = {10.1061/(ASCE)ME.1943-5479.0000304},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84983130758&doi=10.1061%2f%28ASCE%29ME.1943-5479.0000304&partnerID=40&md5=66d10876b3a2af597c05eebee74be7d8},
   year = {2014},
   type = {Journal Article}
}

@article{RN1657,
   author = {Jiang, L. and Leicht, R. M.},
   title = {Supporting automated Constructability checking for formwork construction: An ontology},
   journal = {Journal of Information Technology in Construction},
   volume = {21},
   pages = {456-478},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85000950826&partnerID=40&md5=81d2c81520498cb30170ed0503eeb27a},
   year = {2016},
   type = {Journal Article}
}

@inproceedings{RN1675,
   author = {Jiang, L. and Leicht, R. M. and Messner, J. I.},
   title = {Towards automated constructability checking: A case study of aligning design information with formwork decisions C3 - Congress on Computing in Civil Engineering, Proceedings},
   volume = {2015-January},
   pages = {531-539},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84936886389&partnerID=40&md5=aa8f92967e24d4fb1069084715080dbc},
   type = {Conference Proceedings}
}

@inproceedings{RN1689,
   author = {Jiang, L. and Leicht, R. M. and Okudan Kremer, G. E.},
   title = {Eliciting constructability knowledge for BIM-enabled automated, rule-based constructability review: A case study of formwork C3 - Construction Research Congress 2014: Construction in a Global Network - Proceedings of the 2014 Construction Research Congress},
   pages = {319-328},
   DOI = {10.1061/9780784413517.0033},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84904681500&doi=10.1061%2f9780784413517.0033&partnerID=40&md5=6fdc980d5a873195a9895a3ac703a46c},
   type = {Conference Proceedings}
}

@inproceedings{RN1702,
   author = {Jiang, L. and Solnosky, R. and Leicht, R. M.},
   title = {Virtual prototyping for constructability review C3 - Proceedings, Annual Conference - Canadian Society for Civil Engineering},
   volume = {1},
   pages = {214-224},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84938388947&partnerID=40&md5=629920577629e202066dc031f8a800c6},
   type = {Conference Proceedings}
}

@article{RN1413,
   author = {Johnston, B. and Bulbul, T. and Beliveau, Y. and Wakefield, R.},
   title = {An assessment of pictographic instructions derived from a virtual prototype to support construction assembly procedures},
   journal = {Automation in Construction},
   volume = {64},
   pages = {36-53},
   ISSN = {0926-5805},
   DOI = {10.1016/j.autcon.2015.12.019},
   year = {2016},
   type = {Journal Article}
}

@inbook{RN1409,
   author = {Jupp, J.},
   title = {4D BIM for Environmental Planning and Management},
   booktitle = {International High-Performance Built Environment Conference - a Sustainable Built Environment Conference 2016 Series},
   editor = {Ding, L. and Fiorito, F. and Osmond, P.},
   series = {Procedia Engineering},
   publisher = {Elsevier Science Bv},
   address = {Amsterdam},
   volume = {180},
   pages = {190-201},
   DOI = {10.1016/j.proeng.2017.04.178},
   url = {<Go to ISI>://WOS:000404873600020},
   year = {2017},
   type = {Book Section}
}

@article{RN1725,
   author = {Kala, T. and Seppänen, O. and Stein, C.},
   title = {Using an integrated 5D & location-based planning system in a large hospital construction project},
   journal = {Lean Construction Journal},
   volume = {2010},
   pages = {102-112},
   year = {2010},
   type = {Journal Article}
}

@inproceedings{RN1719,
   author = {Kamardeen, I.},
   title = {8D BIM modelling tool for accident prevention through design C3 - Association of Researchers in Construction Management, ARCOM 2010 - Proceedings of the 26th Annual Conference},
   pages = {281-289},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84860910840&partnerID=40&md5=63d24353c8d24682a2f614391965e954},
   type = {Conference Proceedings}
}

@inbook{RN1436,
   author = {Kannan, M. R. and Santhi, M. H.},
   title = {Constructability Assessment of Climbing Formwork Systems Using Building Information Modeling},
   booktitle = {International Conference on Design and Manufacturing},
   editor = {Sreekumar, M. and Zoppi, M. and Nithiarasu, P.},
   series = {Procedia Engineering},
   publisher = {Elsevier Science Bv},
   address = {Amsterdam},
   volume = {64},
   pages = {1129-1138},
   DOI = {10.1016/j.proeng.2013.09.191},
   url = {<Go to ISI>://WOS:000338436000122},
   year = {2013},
   type = {Book Section}
}

@article{RN1622,
   author = {Kannan, M. R. and Santhi, M. H.},
   title = {Automated constructability rating framework for concrete formwork systems using building information modeling},
   journal = {Asian Journal of Civil Engineering},
   volume = {19},
   number = {4},
   pages = {387-413},
   DOI = {10.1007/s42107-018-0026-3},
   year = {2018},
   type = {Journal Article}
}

@inbook{RN1407,
   author = {Kazaz, A. and Acikara, T. and Ulubeyli, S. and Koyun, H.},
   title = {Detection of Architectural Drawings Errors in 3 Dimension},
   booktitle = {Creative Construction Conference 2017, Ccc 2017},
   editor = {Hajdu, M. and Skibniewski, M. E.},
   series = {Procedia Engineering},
   publisher = {Elsevier Science Bv},
   address = {Amsterdam},
   volume = {196},
   pages = {1018-1025},
   DOI = {10.1016/j.proeng.2017.08.044},
   url = {<Go to ISI>://WOS:000418465300132},
   year = {2017},
   type = {Book Section}
}

@inproceedings{RN1729,
   author = {Khalili, A. and Chua, D. K. H.},
   title = {An IFC-based framework for optimizing prefabrication configurations C3 - Proceedings of the 12th International Conference on Civil, Structural and Environmental Engineering Computing},
   type = {Conference Proceedings}
}

@article{RN1401,
   author = {Kifokeris, D. and Xenidis, Y.},
   title = {Constructability: Outline of Past, Present, and Future Research},
   journal = {Journal of Construction Engineering and Management},
   volume = {143},
   number = {8},
   pages = {13},
   ISSN = {0733-9364},
   DOI = {10.1061/(asce)co.1943-7862.0001331},
   url = {<Go to ISI>://WOS:000403723700008},
   year = {2017},
   type = {Journal Article}
}

@book{RN1417,
   author = {Kim, K. and Cho, Y. K. and Kwak, Y. H.},
   title = {BIM-Based Optimization of Scaffolding Plans for Safety},
   publisher = {Amer Soc Civil Engineers},
   address = {New York},
   series = {Construction Research Congress 2016: Old and New Construction Technologies Converge in Historic San Juan},
   pages = {2709-2718},
   ISBN = {978-0-7844-7982-7},
   year = {2016},
   type = {Book}
}

@inbook{RN1408,
   author = {Ko, C. H.},
   title = {Lean Building Design Model},
   booktitle = {7th International Conference on Engineering, Project, and Production Management},
   editor = {Halicka, K. and Nazarko, L.},
   series = {Procedia Engineering},
   publisher = {Elsevier Science Bv},
   address = {Amsterdam},
   volume = {182},
   pages = {329-334},
   DOI = {10.1016/j.proeng.2017.03.104},
   url = {<Go to ISI>://WOS:000406745400043},
   year = {2017},
   type = {Book Section}
}

@article{RN1680,
   author = {Ko, C. H. and Chung, N. F.},
   title = {Lean design process},
   journal = {Journal of Construction Engineering and Management},
   volume = {140},
   number = {6},
   DOI = {10.1061/(ASCE)CO.1943-7862.0000824},
   year = {2014},
   type = {Journal Article}
}

@inproceedings{RN1686,
   author = {Ko, C. H. and Chung, N. F.},
   title = {Making design process lean C3 - 22nd Annual Conference of the International Group for Lean Construction: Understanding and Improving Project Based Production, IGLC 2014},
   pages = {463-474},
   type = {Conference Proceedings}
}

@inproceedings{RN1611,
   author = {Kotze, D. and Wium, J. A.},
   title = {Structural design constructability verification using BIM C3 - 20th Congress of IABSE, New York City 2019: The Evolving Metropolis - Report},
   pages = {1574-1579},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85074454708&partnerID=40&md5=6f52a22ba0fa171eedc0b355bb94a565},
   type = {Conference Proceedings}
}

@article{RN1438,
   author = {Lee, S. I. and Bae, J. S. and Cho, Y. S.},
   title = {Efficiency analysis of Set-based Design with structural building information modeling (S-BIM) on high-rise building structures},
   journal = {Automation in Construction},
   volume = {23},
   pages = {20-32},
   ISSN = {0926-5805},
   DOI = {10.1016/j.autcon.2011.12.008},
   url = {<Go to ISI>://WOS:000302670000003},
   year = {2012},
   type = {Journal Article}
}

@article{RN1709,
   author = {Lee, S. I. and Cho, Y. S.},
   title = {An application of lean design of structural floor system using structural building information modeling (S-BIM)},
   journal = {Advanced Science Letters},
   volume = {13},
   pages = {158-164},
   DOI = {10.1166/asl.2012.3775},
   year = {2012},
   type = {Journal Article}
}

@inbook{RN1418,
   author = {Lee, X. S. and Yan, C. P. and See, Z. S.},
   title = {Irregular Shaped Building Design Optimization with Building Information Modelling},
   booktitle = {4th International Building Control Conference 2016},
   editor = {Kamaruzzaman, S. N. B. and Ali, A. S. B. and Azmi, N. F. B. and Chua, S. J. L.},
   series = {MATEC Web of Conferences},
   publisher = {E D P Sciences},
   address = {Cedex A},
   volume = {66},
   DOI = {10.1051/matecconf/20166600027},
   year = {2016},
   type = {Book Section}
}

@inproceedings{RN1655,
   author = {Liau, Y. H. and Lin, Y. C.},
   title = {Application of civil information modeling for constructability review for highway projects C3 - ISARC 2017 - Proceedings of the 34th International Symposium on Automation and Robotics in Construction},
   pages = {416-422},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85032354050&partnerID=40&md5=6edd89760db21d7edd054c546b8ffaa1},
   type = {Conference Proceedings}
}

@article{RN1597,
   author = {Liu, J. and Liu, P. and Feng, L. and Wu, W. and Li, D. and Chen, F.},
   title = {Towards automated clash resolution of reinforcing steel design in reinforced concrete frames via Q-learning and building information modeling},
   journal = {Automation in Construction},
   volume = {112},
   DOI = {10.1016/j.autcon.2019.103062},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85078657649&doi=10.1016%2fj.autcon.2019.103062&partnerID=40&md5=75a8e45bc1ea87845fcdec29f4b64a91},
   year = {2020},
   type = {Journal Article}
}

@inproceedings{RN1610,
   author = {Mabrich, A. and Hatami, A.},
   title = {Application of 3D bridge information modeling in the life-cycle of bridges C3 - 20th Congress of IABSE, New York City 2019: The Evolving Metropolis - Report},
   pages = {1549-1552},
   type = {Conference Proceedings}
}

@article{RN1391,
   author = {Mangal, M. and Cheng, J. C. P.},
   title = {Automated optimization of steel reinforcement in RC building frames using building information modeling and hybrid genetic algorithm},
   journal = {Automation in Construction},
   volume = {90},
   pages = {39-57},
   ISSN = {0926-5805},
   DOI = {10.1016/j.autcon.2018.01.013},
   url = {<Go to ISI>://WOS:000430520300004},
   year = {2018},
   type = {Journal Article}
}

@article{RN1400,
   author = {Mansuri, D. and Chakraborty, D. and Elzarka, H. and Deshpande, A. and Gronseth, T.},
   title = {Building Information Modeling enabled Cascading Formwork Management Tool},
   journal = {Automation in Construction},
   volume = {83},
   pages = {259-272},
   ISSN = {0926-5805},
   DOI = {10.1016/j.autcon.2017.08.016},
   year = {2017},
   type = {Journal Article}
}

@article{RN1735,
   author = {Martínez, P. and González, V. and Da Fonseca, E.},
   title = {Green-Lean conceptual integration in the project design, planning and construction},
   journal = {Revista Ingenieria de Construccion},
   volume = {24},
   number = {1},
   pages = {5-32},
   year = {2009},
   type = {Journal Article}
}

@inproceedings{RN1714,
   author = {Miller, N.},
   title = {Design computation for the 21st century high-rise C3 - Asia Ascending: Age of the Sustainable Skyscraper City - A Collection of State-of-the-Art, Multi-Disciplinary Papers on Tall Buildings and Sustainable Cities, Proc. of the CTBUH 9th World Congress},
   pages = {884-889},
   type = {Conference Proceedings}
}

@article{RN1433,
   author = {Moon, H. and Dawood, N. and Kang, L.},
   title = {Development of workspace conflict visualization system using 4D object of work schedule},
   journal = {Advanced Engineering Informatics},
   volume = {28},
   number = {1},
   pages = {50-65},
   ISSN = {1474-0346},
   DOI = {10.1016/j.aei.2013.12.001},
   year = {2014},
   type = {Journal Article}
}

@article{RN1430,
   author = {Moon, H. and Kamat, V. R. and Kang, L.},
   title = {Grid Cell-based Algorithm for Workspace Overlapping Analysis Considering Multiple Allocations of Construction Resources},
   journal = {Journal of Asian Architecture and Building Engineering},
   volume = {13},
   number = {2},
   pages = {341-348},
   ISSN = {1346-7581},
   DOI = {10.3130/jaabe.13.341},
   year = {2014},
   type = {Journal Article}
}

@article{RN1431,
   author = {Moon, H. and Kim, H. and Kim, C. and Kang, L.},
   title = {Development of a schedule-workspace interference management system simultaneously considering the overlap level of parallel schedules and workspaces},
   journal = {Automation in Construction},
   volume = {39},
   pages = {93-105},
   ISSN = {0926-5805},
   DOI = {10.1016/j.autcon.2013.06.001},
   url = {<Go to ISI>://WOS:000331665400009},
   year = {2014},
   type = {Journal Article}
}

@article{RN1638,
   author = {Nascimento, D. L. D. M. and Sotelino, E. D. and Lara, T. P. S. and Caiado, R. G. G. and Ivson, P.},
   title = {Constructability in industrial plants construction: a BIM-Lean approach using the Digital Obeya Room framework},
   journal = {Journal of Civil Engineering and Management},
   volume = {23},
   number = {8},
   pages = {1100-1108},
   DOI = {10.3846/13923730.2017.1385521},
   year = {2017},
   type = {Journal Article}
}

@inproceedings{RN1712,
   author = {Newton, K. and Chileshe, N.},
   title = {Awareness, usage and benefits of building information modelling (BIM) adoption - The case of the South Australian construction organisations C3 - Association of Researchers in Construction Management, ARCOM 2012 - Proceedings of the 28th Annual Conference},
   volume = {1},
   pages = {3-12},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84912086605&partnerID=40&md5=e7d8213df36054a34d38a4ef2b8c1ffc},
   type = {Conference Proceedings}
}

@inproceedings{RN1728,
   author = {Nguyen, H. V. and Lostuvali, B. and Tommelein, I. D.},
   title = {Decision analysis using virtual first-run study of a viscous damping wall system C3 - Proceedings of IGLC17: 17th Annual Conference of the International Group for Lean Construction},
   pages = {371-382},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84856674974&partnerID=40&md5=1f370582d5c947ddbf72de6d194e6736},
   type = {Conference Proceedings}
}

@article{RN1427,
   author = {Oti, A. H. and Tizani, W.},
   title = {BIM extension for the sustainability appraisal of conceptual steel design},
   journal = {Advanced Engineering Informatics},
   volume = {29},
   number = {1},
   pages = {28-46},
   ISSN = {1474-0346},
   DOI = {10.1016/j.aei.2014.09.001},
   url = {<Go to ISI>://WOS:000349882500003},
   year = {2015},
   type = {Journal Article}
}

@article{RN1412,
   author = {Oti, A. H. and Tizani, W. and Abanda, F. H. and Jaly-Zada, A. and Tah, J. H. M.},
   title = {Structural sustainability appraisal in BIM},
   journal = {Automation in Construction},
   volume = {69},
   pages = {44-58},
   ISSN = {0926-5805},
   DOI = {10.1016/j.autcon.2016.05.019},
   year = {2016},
   type = {Journal Article}
}

@book{RN1403,
   author = {Park, J. and Cai, H. B.},
   title = {Framework of Dynamic Daily 4D BIM for Tracking Construction Progress through a Web Environment},
   publisher = {Amer Soc Civil Engineers},
   address = {New York},
   series = {Computing in Civil Engineering 2017: Information Modelling and Data Analytics},
   pages = {193-201},
   ISBN = {978-0-7844-8082-3},
   url = {<Go to ISI>://WOS:000425807900024},
   year = {2017},
   type = {Book}
}

@inproceedings{RN1737,
   author = {Parrish, K. and Wong, J. M. and Tommelein, I. D. and Stojadinovic, B.},
   title = {Value propositions for set-based design of reinforced concrete structures C3 - Proceedings of IGLC16: 16th Annual Conference of the International Group for Lean Construction},
   pages = {495-506},
   type = {Conference Proceedings}
}

@article{RN1732,
   author = {Post, N. M.},
   title = {Digging into 3D modeling: Unearths many worms},
   journal = {ENR (Engineering News-Record)},
   volume = {262},
   number = {14},
   pages = {26-27},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-67649510950&partnerID=40&md5=5817f8dcec13da3895468f621a7c29b1},
   year = {2009},
   type = {Journal Article}
}

@inproceedings{RN1891,
   author = {Riley, D. and Sanvido, V. and Herman, M. and McLaughlin, M. and Kerr, D.},
   title = {Lean and green: The role of design-build mechanical competencies in the design and construction of green buildings C3 - Construction Research Congress 2005: Broadening Perspectives - Proceedings of the Congress},
   pages = {227-236},
   type = {Conference Proceedings}
}

@inbook{RN1399,
   author = {Rodrigues, F. and Estrada, J. and Antunes, F. and Swuste, P.},
   title = {Safety Through Design: A BIM-Based Framework},
   booktitle = {Towards Sustainable Cities in Asia and the Middle East},
   editor = {Calautit, J. and Rodrigues, F. and Chaudhry, H. and Altan, H.},
   series = {Sustainable Civil Infrastructures},
   publisher = {Springer International Publishing Ag},
   address = {Cham},
   pages = {112-123},
   ISBN = {978-3-319-61645-2; 978-3-319-61644-5},
   DOI = {10.1007/978-3-319-61645-2_9},
   url = {<Go to ISI>://WOS:000451674900009},
   year = {2018},
   type = {Book Section}
}

@inbook{RN1423,
   author = {Rokooei, S.},
   title = {Building Information Modeling in Project Management: Necessities, Challenges and Outcomes},
   booktitle = {Proceedings of the 4th International Conference on Leadership, Technology, Innovation and Business Management},
   editor = {Zehir, C. and Ozdemir, E. E.},
   series = {Procedia Social and Behavioral Sciences},
   publisher = {Elsevier Science Bv},
   address = {Amsterdam},
   volume = {210},
   pages = {87-95},
   DOI = {10.1016/j.sbspro.2015.11.332},
   year = {2015},
   type = {Book Section}
}

@article{RN1635,
   author = {Said, H. M. and Reginato, J.},
   title = {Impact of Design Changes on Virtual Design and Construction Performance for Electrical Contractors},
   journal = {Journal of Construction Engineering and Management},
   volume = {144},
   number = {1},
   DOI = {10.1061/(ASCE)CO.1943-7862.0001417},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85034240776&doi=10.1061%2f%28ASCE%29CO.1943-7862.0001417&partnerID=40&md5=ede0cfdccbcb8eb304d784ba45ab9f61},
   year = {2018},
   type = {Journal Article}
}

@inbook{RN1442,
   author = {Shim, C. S. and Yun, N. R. and Song, H. H.},
   title = {Application of 3D Bridge Information Modeling to Design and Construction of Bridges},
   booktitle = {Proceedings of the Twelfth East Asia-Pacific Conference on Structural Engineering and Construction},
   editor = {Fai, L. H.},
   series = {Procedia Engineering},
   publisher = {Elsevier Science Bv},
   address = {Amsterdam},
   volume = {14},
   DOI = {10.1016/j.proeng.2011.07.010},
   year = {2011},
   type = {Book Section}
}

@inproceedings{RN1633,
   author = {Singh, J. and Deng, M. and Cheng, J. C. P.},
   title = {Implementation of mass customization for MEP layout design to reduce manufacturing cost in one-off projects C3 - IGLC 2018 - Proceedings of the 26th Annual Conference of the International Group for Lean Construction: Evolving Lean Construction Towards Mature Production Management Across Cultures and Frontiers},
   volume = {1},
   pages = {625-635},
   DOI = {10.24928/2018/0519},
   type = {Conference Proceedings}
}

@inproceedings{RN1683,
   author = {Spitler, L. E.},
   title = {The effect of inter-team dynamics on the constructability of the BIM model C3 - 22nd Annual Conference of the International Group for Lean Construction: Understanding and Improving Project Based Production, IGLC 2014},
   pages = {957-968},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84923360563&partnerID=40&md5=08e984825ef87c3af78e9b69e94f9cf8},
   type = {Conference Proceedings}
}

@inproceedings{RN1668,
   author = {Spitler, L. and Feliz, T. and Wood, N. and Sacks, R.},
   title = {Constructible bim elements -a root cause analysis of work plan failures C3 - Proceedings of IGLC 23 - 23rd Annual Conference of the International Group for Lean Construction: Global Knowledge - Global Solutions},
   volume = {2015-January},
   pages = {351-360},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85006421881&partnerID=40&md5=c02abb2f72efe35466ba53c9c22c0f78},
   type = {Conference Proceedings}
}

@inproceedings{RN1773,
   author = {Suresh Tiwari, S. T. and Chan, S. W. and Mubarak, M. F.},
   title = {Critical analysis of procurement techniques in construction management sectors C3 - IOP Conference Series: Materials Science and Engineering},
   volume = {342},
   DOI = {10.1088/1757-899X/342/1/012100},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85046253769&doi=10.1088%2f1757-899X%2f342%2f1%2f012100&partnerID=40&md5=511a65b9e210baabee14e70bd7aef6e7},
   type = {Conference Proceedings}
}

@inproceedings{RN1691,
   author = {Sødal, A. H. and Lædre, O. and Svalestuen, F. and Lohne, J.},
   title = {Early contractor involvement: Advantages and disadvantages for the design team C3 - 22nd Annual Conference of the International Group for Lean Construction: Understanding and Improving Project Based Production, IGLC 2014},
   pages = {519-531},
   type = {Conference Proceedings}
}

@book{RN1372,
   author = {Tauriainen, M. and Helminen, J. and Puttonen, J.},
   title = {Managing constructability on a construction stage: BIM methods},
   publisher = {Crc Press-Taylor & Francis Group},
   address = {Boca Raton},
   series = {Ework and Ebusiness in Architecture, Engineering and Construction},
   pages = {621-626},
   ISBN = {978-1-315-38690-4},
   year = {2016},
   type = {Book}
}

@book{RN1375,
   author = {Tauriainen, M. and Mero, A. K. and Lemstrom, A. and Puttonen, J. and Saari, A.},
   title = {The development of constructability using BIM as an intensifying technology},
   publisher = {Crc Press-Taylor & Francis Group},
   address = {Boca Raton},
   series = {Ework and Ebusiness in Architecture, Engineering and Construction},
   pages = {713-716},
   ISBN = {978-0-415-62128-1},
   url = {<Go to ISI>://WOS:000337164500093},
   year = {2012},
   type = {Book}
}

@book{RN1373,
   author = {Tauriainen, M. and Puttonen, J. and Saari, A. and Laakso, P. and Forsblom, K.},
   title = {The assessment of constructability: BIM cases},
   publisher = {Crc Press-Taylor & Francis Group},
   address = {Boca Raton},
   series = {Ework and Ebusiness in Architecture, Engineering and Construction 2014},
   pages = {55-61},
   ISBN = {978-1-315-73695-2; 978-1-138-02710-7},
   year = {2015},
   type = {Book}
}

@inproceedings{RN1736,
   author = {Tommelein, I. D.},
   title = {'Poka yoke' or quality by mistake proofing design and construction systems C3 - Proceedings of IGLC16: 16th Annual Conference of the International Group for Lean Construction},
   pages = {195-205},
   type = {Conference Proceedings}
}

@inproceedings{RN1705,
   author = {Tommelein, I. D. and Gholami, S.},
   title = {Root causes of clashes in building information models C3 - IGLC 2012 - 20th Conference of the International Group for Lean Construction},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84874459384&partnerID=40&md5=28b9b627ceb9647a4eadece6ca95cb2b},
   type = {Conference Proceedings}
}

@article{RN1745,
   author = {Tsao, C. C. Y. and Tommelein, I. D. and Swanlund, E. S. and Howell, G. A.},
   title = {Work structuring to achieve integrated product-process design},
   journal = {Journal of Construction Engineering and Management},
   volume = {130},
   number = {6},
   pages = {780-789},
   DOI = {10.1061/(ASCE)0733-9364(2004)130:6(780)},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-13944269909&doi=10.1061%2f%28ASCE%290733-9364%282004%29130%3a6%28780%29&partnerID=40&md5=ec145fffd43f9aa613e93818e1fb9b3d},
   year = {2004},
   type = {Journal Article}
}

@article{RN1733,
   author = {Tuholski, S. J. and Gursel, A. P. and Tommelein, I. D. and Bomba, G.},
   title = {Lean comparison using process charts of complex seismic retrofit projects},
   journal = {Journal of Construction Engineering and Management},
   volume = {135},
   number = {4},
   pages = {330-339},
   DOI = {10.1061/(ASCE)0733-9364(2009)135:4(330)},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-62549162187&doi=10.1061%2f%28ASCE%290733-9364%282009%29135%3a4%28330%29&partnerID=40&md5=96765b0ca0dd57aa912050a9ad467431},
   year = {2009},
   type = {Journal Article}
}

@inproceedings{RN1654,
   author = {Vahdatikhaki, F. and Mawlana, M.},
   title = {A framework for augmenting 4D visualization of construction projects with scheduling uncertainties C3 - 6th CSCE-CRC International Construction Specialty Conference 2017 - Held as Part of the Canadian Society for Civil Engineering Annual Conference and General Meeting 2017},
   volume = {1},
   pages = {70-78},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85065076290&partnerID=40&md5=13b4f12a91eab869554b4d940b232776},
   type = {Conference Proceedings}
}

@inproceedings{RN1739,
   author = {Varma, V.},
   title = {Advances in the production of shop drawings and their impact on constructability C3 - ASEE Annual Conference and Exposition, Conference Proceedings},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84988707628&partnerID=40&md5=c9fd5399f78ab55944bc71c1986a93b3},
   type = {Conference Proceedings}
}

@inproceedings{RN1614,
   author = {Villanes, J. and Maesaka, L. and Carrera, E.},
   title = {Model of implementation of the BRIM methodology for the optimization of the planning and execution of armed concrete bridges on rivers},
   volume = {2019-July},
   DOI = {10.18687/LACCEI2019.1.1.62},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85073609288&doi=10.18687%2fLACCEI2019.1.1.62&partnerID=40&md5=ef0680be6f96eb2494df6b60a97f33ec},
   type = {Conference Proceedings}
}

@inproceedings{RN1671,
   author = {Vimonsatit, V. and Foo, A. C. M.},
   title = {Benefits of BIM in construction projects C3 - ISEC 2015 - 8th International Structural Engineering and Construction Conference: Implementing Innovative Ideas in Structural Engineering and Project Management},
   pages = {1133-1138},
   type = {Conference Proceedings}
}

@inproceedings{RN1688,
   author = {Wang, J. and Liu, J. and Shou, W. and Wang, X. and Hou, L.},
   title = {Integrating building information modelling and firefly algorithm to optimize tower crane layout C3 - 31st International Symposium on Automation and Robotics in Construction and Mining, ISARC 2014 - Proceedings},
   pages = {321-328},
   type = {Conference Proceedings}
}

@article{RN1420,
   author = {Wang, J. and Wang, X. Y. and Shou, W. C. and Chong, H. Y. and Guo, J.},
   title = {Building information modeling-based integration of MEP layout designs and constructability},
   journal = {Automation in Construction},
   volume = {61},
   pages = {134-146},
   ISSN = {0926-5805},
   DOI = {10.1016/j.autcon.2015.10.003},
   url = {<Go to ISI>://WOS:000366779700012},
   year = {2016},
   type = {Journal Article}
}

@inproceedings{RN1713,
   author = {Wang, L. and Leite, F.},
   title = {Toward process-aware building information modeling for dynamic design and management of construction processes C3 - European Group for Intelligent Computing in Engineering, EG-ICE 2012 - International Workshop: Intelligent Computing in Engineering},
   type = {Conference Proceedings}
}

@article{RN1717,
   author = {Xie, H. and Shi, W. and Issa, R. R. A.},
   title = {Using rfid and real-time virtual reality simulation for optimization in steel construction},
   journal = {Electronic Journal of Information Technology in Construction},
   volume = {16},
   pages = {291-308},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-79954557707&partnerID=40&md5=418045bfbba767ca5ef4af53f10147c0},
   year = {2011},
   type = {Journal Article}
}

@inproceedings{RN1700,
   author = {Yang, H. H. and Lee, M. H. and Siao, F. C. and Lin, Y. C.},
   title = {Use of BIM for construtability analysis in construction C3 - Proceedings of the 13th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC 2013},
   type = {Conference Proceedings}
}

@inbook{RN1424,
   author = {Yang, Y. H. and Liu, P.},
   title = {Benefits and Development of Adoption Building Information Models for Construction Management},
   booktitle = {Proceedings of the 2015 International Conference on Electromechanical Control Technology and Transportation},
   editor = {Shyu, Y. H. and Zhang, Y.},
   series = {AER-Advances in Engineering Research},
   publisher = {Atlantis Press},
   address = {Paris},
   volume = {41},
   pages = {350-355},
   ISBN = {978-94-6252-124-7},
   url = {<Go to ISI>://WOS:000371516200066},
   year = {2015},
   type = {Book Section}
}

@article{RN1368,
   author = {Yeoh, J. K. W. and Jiao, R. X.},
   title = {Ontology-Based Framework for Checking the Constructability of Concrete Volumetric Construction Submodules from BIM},
   journal = {Computing in Civil Engineering 2019: Visualization, Information Modeling, and Simulation},
   pages = {279-285},
   year = {2019},
   type = {Journal Article}
}

@article{RN1679,
   author = {Yung, P. and Wang, J. and Wang, X. and Jin, M.},
   title = {A BIM-enabled MEP coordination process for use in China},
   journal = {Journal of Information Technology in Construction},
   volume = {19},
   pages = {383-398},
   url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84907273598&partnerID=40&md5=1cfbc9dbcac25c03c55b1acfac36ff5a},
   year = {2014},
   type = {Journal Article}
}

0 comentários:

Postar um comentário

Deixe seu comentário a seguir. Grato pela visita.